125x450mm Woody Long Leg Joist Hanger
125x450mm Woody Long Leg Joist Hanger
Price: £5.16 (£6.19 inc VAT)
- Product Code: A1-5006
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: LL - 125x450
- Weight: 389.00g
125x450mm Woody Long Leg Joist Hanger
Width: 125mm
Height: 450mm
Thickness: 1.4mm
Weight: 389g
125x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. This joist hanger ls also available in Grade 1.4301 austenitic stainless steel to EN 10088-2.
Long term safe working load = 11.68 kN. The hangers have been accordingly tested by Ceram Research. Test results are available upon request.
FIXING INSTRUCTIONS for 125x450mm Woody Long Leg Joist Hanger
- All available holes should be nailed using 30 x 3.75 square twist galvanised nails or equivalent, for stainless steel use 30 x 3.75 annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Long-Leg-Hangers_data_sheet.pdf
Brand: TECO
Model: FBS
Delivery Time: In stock, 1-2 days
20mm wide versatile multi purpose banding that can be cut, bent and formed for all types of light applications. Grade 1.4301 austenitic stainless steel to EN 10088-2. 0.7mm thick. Holes: 3.75, M10 round, M10 & M8 square. The square holes are suitable for cup square hex (coach bolt..
£54.99
£65.99 inc VAT
Brand: TECO
Model: LL - 50x600
Delivery Time: In stock, 1-2 days
50mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produc..
£4.08
£4.90 inc VAT
Brand: TECO
Model: WM63x250
Delivery Time: 2 - 4 days
63mm x 250mm Welded Masonry Joist Hanger is designed to support 250mm high timber joist. The joist hanger's actual height is 240mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£5.81
£6.97 inc VAT
Brand: TECO
Model: WR50X200R100
Delivery Time: 2 - 4 days
50mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£4.60
£5.52 inc VAT-250x250.png.webp "Light Duty Restraint Strap 1000mm Twisted 150mm")
Brand: TECO
Model: LD1000T150
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1000mm Twisted 150mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset c..
£1.83
£2.20 inc VAT
Brand: TECO
Model: FHMST215
Delivery Time: 2 - 4 days
Single Piece Masonry Hanger Lock Plate is an additional element to use with the FHM Single Piece Joist Hanger and the WM Welded Masonry Joist Hanger. This plate is easily be transformed into a hook over joist hanger. No special tools or rivets are required. Just insert Lock ..
£1.52
£1.82 inc VAT