150mm Galvanised Fishtailed Frame Cramp
150mm Galvanised Fishtailed Frame Cramp
Price: £0.40 (£0.48 inc VAT)
- Product Code: A1-5707
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FFCPG200
- Weight: 86.00g
150mm Galvanised Fishtailed Frame Cramp
Length: 150mm
Width: 25mm
Thickness: 2.3mm
Weight: 86g
150mm Galvanised Fishtailed Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in galvanised steel EN 10346 DX51D Z275 with fishtailed end.
Features
- 50mm upstand for easy fixing.
- Two 6mm holes and one 8mm hole.
Installation
- Use appropriate fixings.
- Always ensure that compatible corrosion resistant fixings are used i.e. do not use galvanised fixings with stainless steel products or vice versa.
Brand: TECO
Model: TRS1600B100
Delivery Time: In stock, 1-2 days
1600mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to Th..
£2.90
£3.48 inc VAT
Brand: TECO
Model: WT-250/250
Delivery Time: In stock, 1-2 days
250mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirement..
£49.13
£58.96 inc VAT
Brand: TECO
Model: WSS4x40
Delivery Time: In stock, 1-2 days
4x40mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if require..
£23.40
£28.08 inc VAT
Brand: TECO
Model: WT-225/250
Delivery Time: In stock, 1-2 days
225mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirement..
£36.11
£43.33 inc VAT
Brand: TECO
Model: NUTFBZPM12
Delivery Time: In stock, 1-2 days
M12 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£11.11
£13.33 inc VAT
Brand: TECO
Model: WM150x225
Delivery Time: 2 - 4 days
150mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many t..
£9.21
£11.05 inc VAT