Heavy Duty Restraint Strap 1300mm Bent 150mm

Heavy Duty Restraint Strap 1300mm Bent 150mm
Rate this product
Heavy Duty Restraint Strap 1300mm Bent 150mm
Price: £3.88 (£4.66 inc VAT)
  • Product Code: A1-5405
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: HD1300B150
  • Weight: 1,209.00g
Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Add another bend/twist
Quantity
Add next custom strap

Heavy Duty Restraint Strap 1300mm Bent 150mm

Length: 1300mm
Width: 28mm
Thickness: 4mm
Weight: 1209g

Galvanised Heavyt Duty Restraint Strap 1300mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

APPLICATION

For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

85x175mm Galvanised Nail Plate - box of 50
Brand: TECO Model: NPSTD85x175
Delivery Time: In stock, 1-2 days
85x175mm Galvanised Nail Plate - box of 50
85x175mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropriate fixings..
£33.60
£40.32 inc VAT
50x300mm Girder Truss Shoe
Brand: TECO Model: GTS - 50x300
Delivery Time: In stock, 1-2 days
50x300mm Girder Truss Shoe
50mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significantly contribute to fa..
£2.24
£2.69 inc VAT
47x200mm - R140mm Masonry Return Hanger
Brand: TECO Model: FHMR47X200R140
Delivery Time: In stock, 1-2 days
47x200mm - R140mm Masonry Return Hanger
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be ..
£4.69
£5.63 inc VAT
50x100mm Welded Masonry Joist Hanger
Brand: TECO Model: WM50x100
Delivery Time: 2 - 4 days
50x100mm Welded Masonry Joist Hanger
50mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or..
£2.01
£2.41 inc VAT
15mm Galvanised Steel Plasterboard Edge Bead - 3m 15mm Galvanised Steel Plasterboard Edge Bead - 3m
Brand: TECO Model: EB3x15
Delivery Time: In stock, 1-2 days
15mm Galvanised Steel Plasterboard Edge Bead - 3m
15mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape.Specification Galvanised steel EN 10346 DX51D Z275..Installation Use appropriate fixings..
£3.23
£3.88 inc VAT
47x277mm Woody Standard Joist Hanger
Brand: TECO Model: STD - 47x277
Delivery Time: In stock, 1-2 days
47x277mm Woody Standard Joist Hanger
47x277mm Woody Standard Joist Hanger is a timber to timber joist hanger produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is also available in stainless steel. The hanger includes a base tag, which can significantly co..
£1.00
£1.20 inc VAT