15mm Galvanised Steel Drywall Feature Bead - Abutting - 3m
15mm Galvanised Steel Drywall Feature Bead - Abutting - 3m
Price: £9.00 (£10.80 inc VAT)
- Product Code: A1-5859
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: DWFBA3
- Weight: 450.00g
15mm Galvanised Steel Drywall Feature Bead - Abutting - 3m
Length: 3000mm
Width: 15mm
Weight: 450g
15mm Galvanised Steel Drywall Feature Bead - Abutting is for use on thin coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall finishes.
Specification
- Galvanised steel EN 10346 DX51D Z275..
Installation
- Use appropriate fixings.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
Brand: TECO
Model: LD200F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 200mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£0.53
£0.64 inc VAT
Brand: TECO
Model: TRS600B100
Delivery Time: In stock, 1-2 days
600mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to The Building ..
£1.09
£1.31 inc VAT
Brand: TECO
Model: FHM50/200
Delivery Time: In stock, 1-2 days
50mm x 200mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.41
£2.89 inc VAT
Brand: TECO
Model: WM50x100
Delivery Time: 2 - 4 days
50mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£1.90
£2.28 inc VAT
Brand: TECO
Model: ST150
Delivery Time: In stock, 1-2 days
Mild Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Zinc and yellow passivated mild steel. Threaded one end. Screw directly into timber using a small pilot hole if required. - 5mm..
£35.00
£42.00 inc VAT
Brand: TECO
Model: WTIC50
Delivery Time: In stock, 1-2 days
The Universal Wall Tie Insulation Clip is a retaining clip used to hold insulation material against the inner wall of a cavity.Specification Universal retaining clip. Clip straight on to Wall Tie...
£4.18
£5.02 inc VAT