TRS Restraint Strap 1600mm Bent 100mm
TRS Restraint Strap 1600mm Bent 100mm
Price: £2.90 (£3.48 inc VAT)
- Product Code: A1-5804
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: TRS1600B100
- Weight: 592.00g
TRS Restraint Strap 1600mm Bent 100mm
Length: 1600mm
Width: 36mm
Thickness: 1.4mm
Weight: 592g
1600mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to The Building Regulations BS 5268 Part 3 and other building standards for lateral restraint.
CHARACTERISTICS
- 1.4mm thick x 36mm wide,
- Lightweight design makes it easier to handle,
- No need to notch joists making it easier and quicker to install,
- Easier to build into brickwork courses,
- More cost effective when compared to the traditional Heavy Duty Strap and Heavy Edge Rolled Strap,
- Galvanised steel EN 10346 G600,
- Manufactured to EN 845-1:2013,
- Manufactured to EN 845-1:2013.
APPLICATION
For horizontal applications, use min 6 no. 3.75 x 30mm square twist nails or equivalent fixed to timber joists/rafters.
Restraint-Straps.pdf
Brand: TECO
Model and Size: HD1300B150
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 1300mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.AP..
£3.09
£3.71 inc VAT
Brand: TECO
Model and Size: WM63x275
Delivery Time: 2 - 4 days
63mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£6.18
£7.42 inc VAT
Brand: TECO
Model and Size: NP103x152
Delivery Time: In stock, 1-2 days
103x152mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropri..
£82.50
£99.00 inc VAT
Brand: TECO
Model and Size: WB30x2.5
Delivery Time: In stock, 1-2 days
30x2.5 galvanised steel water bar for fitting into door sills for weather protection. Galvanised steel EN 10346 DX51D Z275. Traditionally used with wooden doors, the water bar is fitted into the threshold so that the front door closes against it, sealing any gaps and preventing wind and rain from en..
£3.25
£3.90 inc VAT
Brand: TECO
Model and Size: NUTFBZPM6
Delivery Time: In stock, 1-2 days
M6 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£3.25
£3.90 inc VAT
Brand: TECO
Model and Size: SFT130
Delivery Time: In stock, 1-2 days
Stainless Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Grade 1.4301 austenitic stainless steel to EN 10088-2. Threaded one end. Screw directly into timber using a small pilot hole if required. - 3mm..
£108.58
£130.30 inc VAT