47x100mm - R150mm Masonry Return Hanger
47x100mm - R150mm Masonry Return Hanger
Price: £3.56 (£4.27 inc VAT)
- Product Code: A1-5719
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: FHMR47X100R150
- Weight: 433.00g
47x100mm - R150mm Masonry Return Hanger
Width: 47mm
Height: 100mm
Weight: 433g
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many specials and variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre glavanised 2.4mm
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Where appropriate tested by CERAM Research Ltd Notification Body No.1289.
Installation of 47x100mm - R150mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: US4x30
Delivery Time: In stock, 1-2 days
4x30mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£5.39
£6.47 inc VAT
Brand: TECO
Model and Size: TBHEX8x150
Delivery Time: In stock, 1-2 days
8x150 Hex Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (Fix..
£55.14
£66.17 inc VAT
Brand: TECO
Model and Size: EB3x15
Delivery Time: In stock, 1-2 days
15mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape.Specification Galvanised steel EN 10346 DX51D Z275..Installation Use appropriate fixings..
£2.93
£3.52 inc VAT
Brand: TECO
Model and Size: LD250F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 250mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£0.61
£0.73 inc VAT
Brand: TECO
Model and Size: NP103x152
Delivery Time: In stock, 1-2 days
103x152mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropri..
£82.50
£99.00 inc VAT
Brand: TECO
Model and Size: FHMR47X100R140
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.56
£4.27 inc VAT