TRS Restraint Strap 600mm Bent 100mm
TRS Restraint Strap 600mm Bent 100mm
Price: £1.15 (£1.38 inc VAT)
- Product Code: A1-5800
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: TRS600B100
- Weight: 222.00g
TRS Restraint Strap 600mm Bent 100mm
Length: 600mm
Width: 36mm
Thickness: 1.4mm
Weight: 222g
600mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to The Building Regulations BS 5268 Part 3 and other building standards for lateral restraint.
CHARACTERISTICS
- 1.4mm thick x 36mm wide,
- Lightweight design makes it easier to handle,
- No need to notch joists making it easier and quicker to install,
- Easier to build into brickwork courses,
- More cost effective when compared to the traditional Heavy Duty Strap and Heavy Edge Rolled Strap,
- Galvanised steel EN 10346 G600,
- Manufactured to EN 845-1:2013,
- Manufactured to EN 845-1:2013.
APPLICATION
For horizontal applications, use min 6 no. 3.75 x 30mm square twist nails or equivalent fixed to timber joists/rafters.
Brand: TECO
Model: ARH
Delivery Time: In stock, 1-2 days
90mm Handed Arris Rail Brackets are suitable for fitting plain unended Arris rails to blank posts. Made from galvanised steel EN 10346 DX51D Z275.This Arris rail support bracket allows a triangular Arris rail to be attached to a post without the need for a mortise hole in the post or the rail b..
£3.96
£4.75 inc VAT
Brand: TECO
Model: NP85x87
Delivery Time: In stock, 1-2 days
85x87mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropriate fix..
£46.80
£56.16 inc VAT
Brand: TECO
Model: WM90x225
Delivery Time: 2 - 4 days
90mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£5.47
£6.56 inc VAT
Brand: TECO
Model: HD1200F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1200mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£3.58
£4.30 inc VAT
Brand: TECO
Model: WM100x175
Delivery Time: 2 - 4 days
100mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£7.85
£9.42 inc VAT
Brand: TECO
Model: HD300F
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 300mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£0.90
£1.08 inc VAT