Menu
Menu
Your Cart
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

Heavy Duty Restraint Strap 1600mm Bent 100mm

Heavy Duty Restraint Strap 1600mm Bent 100mm
Heavy Duty Restraint Strap 1600mm Bent 100mm
Price: £4.53 (£5.44 inc VAT)
  • Product Code: A1-5415
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model and Size: HD1600B100
  • Weight: 1,536.00g
Show other lengths

Heavy Duty Restraint Strap 1600mm Bent 100mm

Length: 1600mm
Width: 28mm
Thickness: 5mm
Weight: 1536g

Galvanised Heavy Duty Restraint Strap 1600mm Bent 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

APPLICATION

For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Brand: TECO Model and Size: TCSS 38mm M10
Delivery Time: In stock, 1-2 days
Diameter: 38mmTeeth Size: 0.9mm38mm M10 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.26
£0.31 inc VAT
Add to Cart
Brand: TECO Model and Size: WT-225/250
Delivery Time: In stock, 1-2 days
225mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirement..
£36.11
£43.33 inc VAT
Add to Cart
Brand: TECO Model and Size: WM44x225
Delivery Time: 2 - 4 days
44mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£2.48
£2.98 inc VAT
Add to Cart
Brand: TECO Model and Size: WM90x100
Delivery Time: 2 - 4 days
90mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.33
£5.20 inc VAT
Add to Cart
Brand: TECO Model and Size: STUDBZPM16
Delivery Time: In stock, 1-2 days
M16 Bright Zinc Plated Studding ( threaded bar), suitable for many applications. Supplied as standard in mild steel, high tensile available to order. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with sta..
£4.04
£4.85 inc VAT
Add to Cart
Brand: TECO Model and Size: LL - 100x450
Delivery Time: In stock, 1-2 days
100x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to  EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support...
£4.76
£5.71 inc VAT
Add to Cart