76x300mm Girder Truss Shoe
76x300mm Girder Truss Shoe
Price: £3.33 (£4.00 inc VAT)
- Product Code: A1-5027
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: GTS - 76x300
- Weight: 326.00g
76x300mm Girder Truss Shoe
Width: 76mm
Height: 300mm
Thickness: 1.2mm
Weight: 326g
76mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significantly contribute to faster and more accurate installation and to avoid unnecessary rotation. This base tag can easily be bent where necessary. The girder shoe offers long term safe working load of 7.27kN at 1.5mm deflection. The Girder Truss Shoes have been tested by Ceram Research - the test results are available upon request.
SPECIFICATION
- Especially designed for supporting trussed rafters,
- Tag on the base of the hanger helps avoid rotation and aids fast, accurate location,
- The Tag can easily be bent if not required.
- Bearing 85mm,
- Safe Working Load 7.55kN,
- Pre Galvanised Mild Steel to BS EN 10327:2004 DX51D+Z275
- Also available in Stainless Steel.
- Tested by Ceram Research.
It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
Girder-Hangers_data_sheet.pdf
Brand: TECO
Model: ST150
Delivery Time: In stock, 1-2 days
Mild Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Zinc and yellow passivated mild steel. Threaded one end. Screw directly into timber using a small pilot hole if required. - 5mm..
£35.00
£42.00 inc VAT
Brand: TECO
Model: HD1600B150T
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 1600mm Bent 150mm Twisted 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offs..
£4.70
£5.64 inc VAT
Brand: TECO
Model: WSTDGM20
Delivery Time: In stock, 1-2 days
Diameter: 37mm M20 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£4.64
£5.57 inc VAT
Brand: TECO
Model: SHORTLEG - 38x216
Delivery Time: In stock, 1-2 days
38mm x 216mm Woody Short Leg Joist Hanger is produced from 1mm thick pre-galvanised mild steel produced in accordance to EN BS 10327:2004 DX51D+Z275. It has a shortened leg, and with a 50mm joist bearing. The hanger includes a base tag which can significantly contrib..
£0.78
£0.94 inc VAT
Brand: TECO
Model: NUTFBZPM12
Delivery Time: In stock, 1-2 days
M12 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£11.11
£13.33 inc VAT
Brand: TECO
Model: WM90x275
Delivery Time: 2 - 4 days
90mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£9.38
£11.26 inc VAT