44x150mm Heavy Duty Face Fix Joist Hanger
44x150mm Heavy Duty Face Fix Joist Hanger
Price: £4.53 (£5.44 inc VAT)
- Product Code: A1-5829
- Delivery Time: 2 - 3 Days
- Brand: TECO
- Model: HWTNT44
- Weight: 753.00g
44x150mm Heavy Duty Face Fix Joist Hanger
Width: 44mm
Height: 150mm
Weight: 753g
44mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275.
SPECIFICATION
- All hangers come up to 150mm deep
- M10 & M12 bolt holes for added versatility
- 95mm bearing
- Nominal depth 150mm
- Available in standard or with concealed flanges
- Available also in stainless steel.
FIXING INSTRUCTIONS for 44x150mm Heavy Duty Face Fix Joist Hanger
- In order of avoiding rotation, the hanger should exceed the half of the supported member depth.
- Can be fully nailed, coach screwed and bolted.
- 3no. M10 x 75mm Coach Screws on either side and the supported joist bolted through the hanger using an M12 Bolt
- The safe working load also depends on the block strength and used fixings.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: HD1200F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1200mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£3.58
£4.30 inc VAT
Brand: TECO
Model: CSHBZPM12x280
Delivery Time: In stock, 1-2 days
12mm - 280mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£38.44
£46.13 inc VAT
Brand: TECO
Model: FHMR47X175R150
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£4.54
£5.45 inc VAT
Brand: TECO
Model: TFT100
Delivery Time: In stock, 1-2 days
100mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South ..
£0.43
£0.52 inc VAT
Brand: TECO
Model: GG - 80x550
Delivery Time: In stock, 1-2 days
80mm x 550mm Multi Truss Girder Hanger is a Heavy Duty Girder to Girder Hanger produced from 3mm thick mild steel, which is galvanised upon production. This hanger offers substantial safe working load of 29kN, meaning there is no fear of the hanger breaking off, if the given load is respec..
£63.06
£75.67 inc VAT
Brand: TECO
Model: FHM50/225
Delivery Time: In stock, 1-2 days
50mm x 225mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.85
£3.42 inc VAT