Heavy Duty Restraint Strap 1500mm Bent 100mm

Heavy Duty Restraint Strap 1500mm Bent 100mm
Rate this product
Heavy Duty Restraint Strap 1500mm Bent 100mm
Price: £4.48 (£5.38 inc VAT)
  • Product Code: A1-5412
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: HD1500B100
  • Weight: 1,395.00g
Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Add another bend/twist
Quantity
Add next custom strap

Heavy Duty Restraint Strap 1500mm Bent 100mm

Length: 1500mm
Width: 28mm
Thickness: 4mm
Weight: 1395g

Galvanised Heavy Duty Restraint Strap 1500mm Bent 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

APPLICATION

For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

75x200mm Welded Straddle Hanger 100ST
Brand: TECO Model: WS75x200S100
Delivery Time: 2 - 4 days
75x200mm Welded Straddle Hanger 100ST
Straddle: 100mm75mm x 200mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned dire..
£12.30
£14.76 inc VAT
42x175mm Galvanised Nail Plate - box of 100
Brand: TECO Model: NP41x152
Delivery Time: In stock, 1-2 days
42x175mm Galvanised Nail Plate - box of 100
42x175mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropriate fixings..
£46.80
£56.16 inc VAT
150x150mm Heavy Duty Face Fix Joist Hanger
Brand: TECO Model: HWTNT150
Delivery Time: 2 - 3 Days
150x150mm Heavy Duty Face Fix Joist Hanger
150mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings.  The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONAll hangers come..
£10.69
£12.83 inc VAT
Heavy Duty Restraint Strap 3600mm Flat
Guide Price
Brand: TECO Model: HD3600F
Delivery Time: In stock, 1-2 days
Heavy Duty Restraint Strap 3600mm Flat
Galvanised Heavy Duty Restraint Strap 3600mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
Guide Price: £8.96
£10.75 inc VAT
Standard Round Washers M24 - box of 25
Brand: TECO Model: WSTDGM24
Delivery Time: In stock, 1-2 days
Standard Round Washers M24 - box of 25
Diameter: 44mm M24 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£8.10
£9.72 inc VAT
50mm Woody Truss Clip
Brand: TECO Model: TCW50
Delivery Time: In stock, 1-2 days
50mm Woody Truss Clip
50mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe working lo..
£0.33
£0.40 inc VAT