Heavy Duty Restraint Strap 1200mm Bent 100mm

Heavy Duty Restraint Strap 1200mm Bent 100mm
Rate this product
Heavy Duty Restraint Strap 1200mm Bent 100mm
Price: £3.58 (£4.30 inc VAT)
  • Product Code: A1-5399
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: HD1200B100
  • Weight: 1,116.00g
Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Add another bend/twist
Quantity
Add next custom strap

Heavy Duty Restraint Strap 1200mm Bent 100mm

Length: 1200mm
Width: 28mm
Thickness: 4mm
Weight: 1116g

Galvanised Heavy Duty Restraint Strap 1200mm Bent 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

APPLICATION

For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

85x175mm Galvanised Nail Plate - box of 50
Brand: TECO Model: NPSTD85x175
Delivery Time: In stock, 1-2 days
85x175mm Galvanised Nail Plate - box of 50
85x175mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropriate fixings..
£33.60
£40.32 inc VAT
10x75 Thunderbolt Hex Head - box of 50
Brand: TECO Model: TBHEX10x75
Delivery Time: In stock, 1-2 days
10x75 Thunderbolt Hex Head - box of 50
10x75 Hex Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (Fix..
£41.40
£49.68 inc VAT
225mm Stainless Steel Coiled Mesh Lath - 20m length 225mm Stainless Steel Coiled Mesh Lath - 20m length
Brand: TECO Model: EMLS225
Delivery Time: In stock, 1-2 days
225mm Stainless Steel Coiled Mesh Lath - 20m length
225mm Stainless Steel Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together.Gloves should be..
£68.77
£82.52 inc VAT
63mm M12mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Brand: TECO Model: TCSS 63mm M12
Delivery Time: In stock, 1-2 days
63mm M12mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Diameter: 63mmTeeth Size: 1.2mm63mm M12 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-gal..
£0.46
£0.55 inc VAT
44x125mm Welded Masonry Joist Hanger
Brand: TECO Model: WM44x125
Delivery Time: 2 - 4 days
44x125mm Welded Masonry Joist Hanger
44mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or..
£2.14
£2.57 inc VAT
uPVC Arch Bead - plaster depth 2-3mm
Brand: TECO Model: PBAR2/3
Delivery Time: In stock, 1-2 days
uPVC Arch Bead - plaster depth 2-3mm
Plaster depth 2-3mm uPVC Plaster Arch Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact resistant d..
£2.53
£3.04 inc VAT