Heavy Duty Restraint Strap 600mm Bent 100mm

Heavy Duty Restraint Strap 600mm Bent 100mm
Rate this product
Heavy Duty Restraint Strap 600mm Bent 100mm
Price: £1.79 (£2.15 inc VAT)
  • Product Code: A1-5434
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: HD600B100
  • Weight: 558.00g
Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Add another bend/twist
Quantity
Add next custom strap

Heavy Duty Restraint Strap 600mm Bent 100mm

Length: 600mm
Width: 28mm
Thickness: 4mm
Weight: 558g

Galvanised Heavy Duty Restraint Strap 600mm Bent 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

APPLICATION

For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

47x150mm - R115mm Masonry Return Hanger
Brand: TECO Model: FHMR47X150R115
Delivery Time: In stock, 1-2 days
47x150mm - R115mm Masonry Return Hanger
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be ..
£4.03
£4.84 inc VAT
200mm Timber Drive Screws - box of 10
Brand: TECO Model: TDS200/10
Delivery Time: In stock, 1-2 days
200mm Timber Drive Screws - box of 10
200mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications.  FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£10.91
£13.09 inc VAT
47x225mm Single Piece Masonry Hanger
Brand: TECO Model: FHM47/225
Delivery Time: In stock, 1-2 days
47x225mm Single Piece Masonry Hanger
47mm x 225mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using appropr..
£2.82
£3.38 inc VAT
47x225mm - R100mm Masonry Return Hanger
Brand: TECO Model: FHMR47X225R100
Delivery Time: In stock, 1-2 days
47x225mm - R100mm Masonry Return Hanger
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be ..
£4.43
£5.32 inc VAT
38mm M10mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Brand: TECO Model: TCSS 38mm M10
Delivery Time: In stock, 1-2 days
38mm M10mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Diameter: 38mmTeeth Size: 0.9mm38mm M10 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-gal..
£0.28
£0.34 inc VAT
275mm Starter Tie with plugs - pack of 10
Brand: TECO Model: SST275
Delivery Time: In stock, 1-2 days
275mm Starter Tie with plugs - pack of 10
275mm Starter Ties are used where new walls are being built directly from existing brickwork. There is a drip feature for use where there is a cavity and a new wall needs to be built. Grade 1.4301 austenitic stainless steel to EN 10088-2. Features Stainless steel, Diameter 4mm,Supplied complete with..
£23.25
£27.90 inc VAT