Herringbone Joist Strut - 400mm centres
Herringbone Joist Strut - 400mm centres
Price: £0.45 (£0.54 inc VAT)
- Product Code: A1-5589
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: HB400
- Weight: 105.00g
Herringbone Joist Strut - 400mm centres
Length: 480mm
Weight: 105g
Herringbone Joist Strut HB400 provides the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins. Made from galvanised steel EN 10346 DX51D Z275. Joint centres - 400mm, Strut length - 480mm. Meets bracing requirements for long span domestic floors. In the interest of safety all corners are rounded. Only three sizes are needed to suit all standard nominal joist centres. Only two fixings per end are required.
Installation
- Generally required in the centre of the span when floor joists exceed 2.5 metres.
- Where spans exceed 4.5 metres two rows will be required at 1/3 and 2/3 of span.
- Holes should be nailed using 30 x 3.75 square twist nails or equivalent screws.
Brand: TECO
Model: LD1000F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1000mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.S..
£1.83
£2.20 inc VAT
Brand: TECO
Model: HD2000F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 2000mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£6.60
£7.92 inc VAT
Brand: TECO
Model: LD750T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 750mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.SPECIFIC..
£1.37
£1.64 inc VAT
Brand: TECO
Model: AB60
Delivery Time: In stock, 1-2 days
60x40mm Heavy duty angle bracket is a versatile, general purpose 90-degree bracket used to strengthen timer joists, roof trusses etc. SpecificationPre Galvanised Mild Steel SD280GD+Z275Fixing InstructionsThe TECO Angle Bracket is the ultimate angle cleat using either Bolts, Coach Screws, Nails, S..
£0.89
£1.07 inc VAT
Brand: TECO
Model: WT-250/250
Delivery Time: In stock, 1-2 days
250mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirements of BS EN..
£48.00
£57.60 inc VAT
Brand: TECO
Model: GTS - 63x300
Delivery Time: In stock, 1-2 days
63mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significantly contribute to fa..
£3.33
£4.00 inc VAT