300mm Hip Iron - 5mm thick

Damp Proof Membrane is intended for use within solid concrete floors to prevent the rise of moisture or damp through structure flooring. Suitable for most construction damp proofing requirements. The DPM can be used as either below the slab application, directly below the flooring surface or in a sa..

Galvanised Skim Angle Bead is for use on plasterboard or aerated blocks. Designed for standard single coat plasterwork for internal thin-coat plaster application, used to reinforce and protect plaster on corners and reveals at its weakest points.Specification Galvanised steel EN 10346 DX51D Z27..

200mm Movement Ties are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move. Typical usages are in areas where masonry is restrained to Steelwork columns and ..

Diameter: 50mmTeeth Size: 0.9mm50mm M10 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-gal..

Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be ..

Galvanised Light Duty Restraint Strap 250mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..