Light Duty Restraint Strap 600mm Twisted 100mm
Light Duty Restraint Strap 600mm Twisted 100mm
Price: £1.04 (£1.25 inc VAT)
- Product Code: A1-5379
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: LD600T100
- Weight: 305.00g
Light Duty Restraint Strap 600mm Twisted 100mm
Length: 600mm
Width: 28mm
Thickness: 2.4mm
Weight: 305g
Galvanised Light Duty Restraint Strap 600mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.
SPECIFICATION
The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.
Straps can be ordered to any length up to 15m.
Restraint-Straps.pdf
Brand: TECO
Model and Size: WM44x225
Delivery Time: 2 - 4 days
44mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£2.48
£2.98 inc VAT
Brand: TECO
Model and Size: FHM50/225
Delivery Time: In stock, 1-2 days
50mm x 225mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£26.63
£31.96 inc VAT
Brand: TECO
Model and Size: WSTDGM10
Delivery Time: In stock, 1-2 days
Diameter: 20mm M10 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use gal..
£1.43
£1.72 inc VAT
Brand: TECO
Model and Size: GB490
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast..
£55.76
£66.91 inc VAT
Brand: TECO
Model and Size: ST150
Delivery Time: In stock, 1-2 days
Mild Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Zinc and yellow passivated mild steel. Threaded one end. Screw directly into timber using a small pilot hole if required. - 5mm..
£35.00
£42.00 inc VAT
Brand: TECO
Model and Size: WM125x100
Delivery Time: 2 - 4 days
125mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the tim..
£4.45
£5.34 inc VAT