150x450mm Woody Long Leg Joist Hanger
150x450mm Woody Long Leg Joist Hanger
Price: £6.45 (£7.74 inc VAT)
- Product Code: A1-5041
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: LL - 150x450
- Weight: 400.00g
150x450mm Woody Long Leg Joist Hanger
Width: 150mm
Height: 450mm
Thickness: 1.4mm
Weight: 400g
150x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. This joist hanger ls also available in Grade 1.4301 austenitic stainless steel to EN 10088-2.
Long term safe working load = 11.68 kN. The hangers have been accordingly tested by Ceram Research. Test results are available upon request.
FIXING INSTRUCTIONS for 150x450mm Woody Long Leg Joist Hanger
- All available holes should be nailed using 30 x 3.75 square twist galvanised nails or equivalent, for stainless steel use 30 x 3.75 annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Long-Leg-Hangers_data_sheet.pdf
Brand: TECO
Model: NUTFBZPM12
Delivery Time: In stock, 1-2 days
M12 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£11.11
£13.33 inc VAT
Brand: TECO
Model: LD1200F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1200mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres ho..
£2.20
£2.64 inc VAT
Brand: TECO
Model: GBCLIP225/50
Delivery Time: In stock, 1-2 days
225mm Galvanised Gravel Board Clip with lip for concrete for fitting gravel boards securely to fence posts. Width 50mm. Made from Galvanised Steel EN 10346 DX51D Z275. ..
£2.06
£2.47 inc VAT
Brand: TECO
Model: WM63x275
Delivery Time: 2 - 4 days
63mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£6.52
£7.82 inc VAT
Brand: TECO
Model: MFT125/504BA - 125x190
Delivery Time: In stock, 1-2 days
125mm x 190mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base ..
£3.09
£3.71 inc VAT
Guide Price
Brand: TECO
Model: MINI - 50x94
Delivery Time: In stock, 1-2 days
50x94mm Woody Mini Joist Hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. Also available in stainless steel. The hanger includes a base tag that can significantly contribute to faster and more accurat..
Guide Price: £0.58
£0.70 inc VAT