38x100mm Mini Girder Truss Shoe
38x100mm Mini Girder Truss Shoe
Price: £1.06 (£1.27 inc VAT)
- Product Code: A1-13
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MGTS - 38x100
- Weight: 211.00g
38x100mm Mini Girder Truss Shoe
Width: 38mm
Height: 100mm
Thickness: 1.2mm
Weight: 211g
38mm x100mm Mini Girder Truss Shoe is a Face Fix Timber Hanger with a 85mm bearing and substantial safe working load of 5.25kN. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The TECO Mini Girder Truss Shoe is for short span, mono or in-fill trusses 100mm deep. The hanger has base tag that would significantly contribute to faster and more accurate installation and help to avoid unnecessary rotation.
SPECIFICATION
- Face Fix Timber Hanger,
- Tag on the base of the hanger helps avoid rotation and aids fast, accurate location,
- The Tag can easily be bent if not required.
- Bearing 85mm,
- Safe Working Load 5.25kN,
- Pre Galvanised Mild Steel to BS EN 10327:2004 DX51D+Z275
- Also available in Stainless Steel.
- Tested by Ceram Research.
FIXING INSTRUCTIONS
All holes should be nailed using 30 x 3.75 square twist nails or equivalent.
Girder-Hangers_data_sheet.pdf
Brand: TECO
Model: MT200
Delivery Time: In stock, 1-2 days
200mm Movement Ties are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move. Typical usages are in areas where masonry is restrained to Steelwork columns and ..
£13.00
£15.60 inc VAT
Brand: TECO
Model: CSHBZPM6x40
Delivery Time: In stock, 1-2 days
6mm - 40mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied compl..
£32.18
£38.62 inc VAT
Brand: TECO
Model: MFT38/404BA 38x183
Delivery Time: In stock, 1-2 days
38mm x 183mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base locati..
£2.68
£3.22 inc VAT
Brand: TECO
Model: MFT100/504BA - 100x202
Delivery Time: In stock, 1-2 days
100mm x 202mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base ..
£3.05
£3.66 inc VAT
Brand: TECO
Model: WM50x250
Delivery Time: 3 - 5 days
50mm x 250mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.26
£5.11 inc VAT
Brand: TECO
Model: NUTFBZPM12
Delivery Time: In stock, 1-2 days
M12 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£11.11
£13.33 inc VAT