100x202mm Multifunctional Joist Hanger
100x202mm Multifunctional Joist Hanger
Price: £3.05 (£3.66 inc VAT)
- Product Code: A1-5270
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT100/504BA - 100x202
- Weight: 624.00g
100x202mm Multifunctional Joist Hanger
Width: 100mm
Height: 202mm
Thickness: 2mm
Weight: 624g
100mm x 202mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 10.45 kN.
FIXING INSTRUCTIONS for 100x202mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: TCW50
Delivery Time: In stock, 1-2 days
50mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
£0.31
£0.37 inc VAT
Brand: TECO
Model: WM75x150
Delivery Time: 2 - 4 days
75mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.43
£5.32 inc VAT
Brand: TECO
Model: HWTNT76
Delivery Time: 2 - 3 Days
76mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONAl..
£7.99
£9.59 inc VAT
Brand: TECO
Model: LL - 50x450
Delivery Time: In stock, 1-2 days
50x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£3.36
£4.03 inc VAT
Brand: TECO
Model: SRTCG 102mm
Delivery Time: In stock, 1-2 days
Diameter: 102mm102mm Galvanised Steel Split Ring Timber Connector is designed for heavy shear loads in timber to timber connections.The Split Ring with the bevelled inside and outside face makes it easier to insert in the pre-cut grooves and also gives greater load capacity.The Ring i..
£7.53
£9.04 inc VAT
Brand: TECO
Model: LD1600F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1600mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres ho..
£2.78
£3.34 inc VAT