38x450mm Woody Long Leg Joist Hanger
38x450mm Woody Long Leg Joist Hanger
Price: £3.36 (£4.03 inc VAT)
- Product Code: A1-5046
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: LL - 38x450
- Weight: 465.00g
38x450mm Woody Long Leg Joist Hanger
Width: 38mm
Height: 450mm
Thickness: 1.4mm
Weight: 465g
38x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. This joist hanger ls also available in Grade 1.4301 austenitic stainless steel to EN 10088-2.
Long term safe working load = 11.68 kN. The hangers have been accordingly tested by Ceram Research. Test results are available upon request.
FIXING INSTRUCTIONS for 38x450mm Woody Long Leg Joist Hanger
- All available holes should be nailed using 30 x 3.75 square twist galvanised nails or equivalent, for stainless steel use 30 x 3.75 annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Long-Leg-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: EB3x13
Delivery Time: In stock, 1-2 days
13mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape.Specification Galvanised steel EN 10346 DX51D Z275..Installation Use appropriate fixings..
£2.93
£3.52 inc VAT
Brand: TECO
Model and Size: LD600F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 600mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centre..
£1.04
£1.25 inc VAT
Brand: TECO
Model and Size: WM132x200
Delivery Time: 2 - 4 days
132mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£8.81
£10.57 inc VAT
Brand: TECO
Model and Size: WM44x150
Delivery Time: 2 - 4 days
44mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many ti..
£2.05
£2.46 inc VAT
Brand: TECO
Model and Size: TCSS 63mm M10
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mm63mm M10 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.73
£0.88 inc VAT
Brand: TECO
Model and Size: HD1000B100T
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1000mm Bent 100mm Twisted 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offse..
£2.99
£3.59 inc VAT