50x95mm Multifunctional Mini Joist Hanger
50x95mm Multifunctional Mini Joist Hanger
Price: £1.73 (£2.08 inc VAT)
- Product Code: A1-5020
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: MFM - 50x95
- Weight: 226.00g
50x95mm Multifunctional Mini Joist Hanger
Width: 50mm
Height: 95mm
Thickness: 1mm
Weight: 226g
50mm x 95mm Multifunctional Mini Joist Hanger is a Face Fix Joist Hanger, produced from 1.2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed.
FIXING INSTRUCTIONS for 50x95mm Multifunctional Mini Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: TFT50
Delivery Time: In stock, 1-2 days
50mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South E..
£0.30
£0.36 inc VAT
Brand: TECO
Model and Size: FHMR47X125R150
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£3.76
£4.51 inc VAT
Brand: TECO
Model and Size: TBHEX8x75
Delivery Time: In stock, 1-2 days
8x75 Hex Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (Fixt..
£55.43
£66.52 inc VAT
Brand: TECO
Model and Size: LD600T150
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 600mm Twisted 150mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm..
£1.04
£1.25 inc VAT
Brand: TECO
Model and Size: PBPS15/17
Delivery Time: In stock, 1-2 days
Plaster depth 15-17mm uPVC Plaster Stop Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£3.56
£4.27 inc VAT
Brand: TECO
Model and Size: MFT125/346BA - 125x110
Delivery Time: In stock, 1-2 days
125mm x 110mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base ..
£2.25
£2.70 inc VAT