100x70mm Multifunctional Mini Joist Hanger

100x70mm Multifunctional Mini Joist Hanger
Rate this product
100x70mm Multifunctional Mini Joist Hanger
Price: £1.82 (£2.18 inc VAT)
  • Product Code: A1-5022
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: MFM - 100x70
  • Weight: 226.00g

100x70mm Multifunctional Mini Joist Hanger

Width: 100mm
Height: 70mm
Thickness: 1mm
Weight: 226g

Multifunctional Mini Joist Hanger 100 x 70mm is one of 1.6mm Face Fix Joist Hangers, available in five different sizes with a 86mm bearing. The hanger is produced from pre-galvanised mild steel thickness of only 1,6mm, all in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. 

FIXING INSTRUCTIONS for 100x70mm Multifunctional Mini Joist Hanger

It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.

SPECIFICATION

  • Joist bearing 86mm.
  • Also available in Stainless Steel.
  • Tested by Ceram Research.

 

300ml Polyester Resin Tube
Brand: TECO Model: RESINPS
Delivery Time: In stock, 1-2 days
300ml Polyester Resin Tube
300mm Polyester Resin is designed to aid and add strength to anchors or fixings, threaded studs, internal threaded sockets and rebar. Can be used in brickwork, concrete and most natural stone. Supplied with mixer nozzle. FeaturesStyrene free.Expansion free.Easy to dispense.Close spacing and edg..
£14.80
£17.76 inc VAT
85x87mm Galvanised Nail Plate - box of 100
Brand: TECO Model: NP85x87
Delivery Time: In stock, 1-2 days
85x87mm Galvanised Nail Plate - box of 100
85x87mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropriate fixings...
£46.80
£56.16 inc VAT
Standard Round Washers M16 - box of 25
Brand: TECO Model: WSTDGM16
Delivery Time: In stock, 1-2 days
Standard Round Washers M16 - box of 25
Diameter: 30mm M16 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required.  InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use gal..
£3.00
£3.60 inc VAT
Light Duty Restraint Strap 1200mm Twisted 100mm
Brand: TECO Model: LD1200T100
Delivery Time: In stock, 1-2 days
Light Duty Restraint Strap 1200mm Twisted 100mm
Galvanised Light Duty Restraint Strap 1200mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.SPECIFI..
£2.20
£2.64 inc VAT
76mm M12mm Stainless Steel Single Sided Tooth Plate Timber Connector
Brand: TECO Model: TCSS 76mm M12 SS
Delivery Time: In stock, 1-2 days
76mm M12mm Stainless Steel Single Sided Tooth Plate Timber Connector
Diameter: 76mmTeeth Size: 1.2mmSingle Sided Stainless Steel Tooth Plate Timber Connector 76mm M12 is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity...
£3.64
£4.37 inc VAT
6x75 Thunderbolt Flange Head - box of 100
Brand: TECO Model: TBFlange6x75
Delivery Time: In stock, 1-2 days
6x75 Thunderbolt Flange Head - box of 100
6x75 Flange Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (F..
£37.90
£45.48 inc VAT