50x95mm Multifunctional Mini Joist Hanger
50x95mm Multifunctional Mini Joist Hanger
Price: £1.82 (£2.18 inc VAT)
- Product Code: A1-5020
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFM - 50x95
- Weight: 226.00g
50x95mm Multifunctional Mini Joist Hanger
Width: 50mm
Height: 95mm
Thickness: 1mm
Weight: 226g
50mm x 95mm Multifunctional Mini Joist Hanger is a Face Fix Joist Hanger, produced from 1.2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed.
FIXING INSTRUCTIONS for 50x95mm Multifunctional Mini Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: WM132x200
Delivery Time: 2 - 4 days
132mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£9.31
£11.17 inc VAT
Brand: TECO
Model: WR50X225R100
Delivery Time: 2 - 4 days
50mm x 225mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£4.70
£5.64 inc VAT
Brand: TECO
Model: EMLG63
Delivery Time: In stock, 1-2 days
63mm Galvanised Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. Specification Galvanised steel EN 10346 DX51D Z275, Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together...
£7.32
£8.78 inc VAT
-250x250.png "Heavy Duty Restraint Strap 1000mm Twisted 150mm")
Brand: TECO
Model: HD1000T150
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1000mm Twisted 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres h..
£2.99
£3.59 inc VAT
Brand: TECO
Model: HBH8/2000
Delivery Time: In stock, 1-2 days
8mm Helical Bar is used in a variety of applications; in general the metre lengths are used for crack stitching and reinforcing masonry in both new and existing masonry structures. The deformation of the fins makes the bonding characteristics of the Helical Bar far superior to alternative standard r..
£12.44
£14.93 inc VAT
Brand: TECO
Model: PB6/10
Delivery Time: In stock, 1-2 days
Plaster depth 6-10mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£3.43
£4.12 inc VAT