50x100mm Single Piece Masonry Hanger
50x100mm Single Piece Masonry Hanger
Price: £1.80 (£2.16 inc VAT)
- Product Code: A1-5422
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FHM50/100
- Weight: 330.00g
50x100mm Timber to Masonry Single Piece Masonry Hanger
Width: 50mm
Height: 100mm
Thickness: 2.5mm
Weight: 330g
50mm x 100mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using appropriate fixings. The straight top flange and a lock plate allows the hanger to be transformed into a straddle or a hook over, with no special equipment required. Long term safe working load = 5.4 kN.
FIXING INSTRUCTIONS for 50x100mm Single Piece Masonry Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent. Stainless steel hangers shouldbe nailed using 30 x 3.75 annular ring shank nails.
- To provide lateral restraint HD straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dryslots.
- Use appropriate fixings.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainlesssteel products or vice versa.
- Use correct strength mortar as per British Standard.
SPECIFICATION
- Galvanised steel to EN 10346 DX51D Z600.
- Tested by CERAM Research Ltd Notification Body No.1289.
- Manufactured to EN 845-1:2013.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model: HB450
Delivery Time: In stock, 1-2 days
Herringbone Joist Strut HB450 provides the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins. Made from galvanised steel EN 10346 DX51D Z275. Joint centres - 400mm, Strut length - 480mm. Meets bracing requiremen..
£0.48
£0.58 inc VAT
Brand: TECO
Model: US4x30
Delivery Time: In stock, 1-2 days
4x30mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£5.39
£6.47 inc VAT
Brand: TECO
Model: WS63x200S100
Delivery Time: 2 - 4 days
Straddle: 100mm63mm x 200mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned dire..
£11.08
£13.30 inc VAT
Brand: TECO
Model: NUTFBZPM12
Delivery Time: In stock, 1-2 days
M12 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£11.11
£13.33 inc VAT
Brand: TECO
Model: FS100x700
Delivery Time: In stock, 1-2 days
100x100mm Spiked Post Shoe to hold fence posts above ground level, suitable for standard soil conditions. Galvanised and Powder Coated Brown colour. Shoe height: 150mm, Support height: 700mm..
£18.06
£21.67 inc VAT
Brand: TECO
Model: TAPEDW100
Delivery Time: In stock, 1-2 days
100mm wide professional internal plastering joint tapes. Open weave self-adhesive plasterers scrim tape is used for reinforcing joints and patching repairs on plasterboard. InstallationTapered drywall joints have special edges that provide a pocket for joint compound and tape.Mix the sett..
£4.24
£5.09 inc VAT