75mm Stainless Steel Soffit Vent Mesh is for use in new build properties. It is used over vents in soffits to allow air flow to prevent condensation but prevents access to birds and insects. Made from Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gloves should be worn as edges may be sharp...

Galvanised Heavy Duty Restraint Strap 900mm Bent 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APPL..

63x240mm Top Fix I-Joist Hanger is an innovative new backer free Joist Hanger  to suit solid engineered wood products as well as I-Joists. It is engineered to combine maximum load carrying capacity with easy hands-free site installation, at minimum cost. Long term safe working lo..

13mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape.Specification Galvanised steel EN 10346 DX51D Z275..Installation Use appropriate fixings..

75mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South E..

63mm x 300mm Woody No Tag Joist Hanger is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request. Also available in Stainles..