63mm x 240mm TECO TIJ-T I Joist Hanger
63mm x 240mm TECO TIJ-T I Joist Hanger
Price: £1.71 (£2.05 inc VAT)
- Product Code: A1-5485
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: TIJ-TI - 63x240mm
- Weight: 362.88g
63mm x 240mm TECO TIJ-T I Joist Hanger
Width: 63mm
Height: 240mm
Thickness: 0.7mm
Weight: 362.88g
63x240mm Top Fix I-Joist Hanger is an innovative new backer free Joist Hanger to suit solid engineered wood products as well as I-Joists. It is engineered to combine maximum load carrying capacity with easy hands-free site installation, at minimum cost. Long term safe working load = 4.3 kN. Long term safe working load with enhanced nailing = 8.6 kN.
CHARACTERISTICS
- Unique hands free installation,
- Qualified for use with various nail types,
- Requires less nails,
- Face fix or top fix design,
- Enhanced load carrying option,
- Can be used on solid EWP or I-Joists.
FIXING INSTRUCTIONS for 63x240mm Top Fix I-Joist Hanger
- All standard round holes should be filled with either 2.65 x 40mm or 2.8 x 40mm or 3.4 x 35mm ring-shank nails or 3.75 x 30mm square twist nails.
- Fill diamond shaped holes for enhanced installation to I-Joist with backer blocks or solid LVL or Glulam headers.
- The TIJs unique hands free design locates the hanger on I-Joist headers leaving the installer with both hands free for easier installation.
SPECIFICATION
- 0.7mm pre galvanised mild steel EN 10346 DX51D Z275.
I-Joist-Hangers.pdf
Brand: TECO
Model: FHM47/100
Delivery Time: In stock, 1-2 days
47mm x 100mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£1.90
£2.28 inc VAT
Brand: TECO
Model: LL - 50x600
Delivery Time: In stock, 1-2 days
50mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produc..
£4.08
£4.90 inc VAT
Brand: TECO
Model: SBG3
Delivery Time: In stock, 1-2 days
Galvanised Skim Angle Bead is for use on plasterboard or aerated blocks. Designed for standard single coat plasterwork for internal thin-coat plaster application, used to reinforce and protect plaster on corners and reveals at its weakest points.Specification Galvanised steel EN 10346 DX51..
£1.80
£2.16 inc VAT
Brand: TECO
Model: TFT75
Delivery Time: In stock, 1-2 days
75mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South E..
£0.33
£0.40 inc VAT
Brand: TECO
Model: MB3x12
Delivery Time: In stock, 1-2 days
12mm Galvanised Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length.Specification Galvanised..
£22.55
£27.06 inc VAT
Brand: TECO
Model: WT-225/50
Delivery Time: In stock, 1-2 days
225mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirement..
£9.29
£11.15 inc VAT