490x375mm Gallows Bracket GB490 - pack of 2
490x375mm Gallows Bracket GB490 - pack of 2
Price: £55.76 (£66.91 inc VAT)
- Product Code: A1-5588
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: GB490
- Weight: 7,560.00g
490x375mm Gallows Bracket GB490 - pack of 2
Width: 490mm
Height: 375mm
Weight: 7560g
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs.
Specification
- Horizontal and vertical angle 50 x 50 x 5mm.
- 45 degree angle 25 x 25 x 3mm.
- Holed for M12.
- Finished in red Oxide Primer.
Installation
- The chimney breast is located on an external flank wall and no external projection exists.
- Where Gallows Brackets are not being used, then a steel beam (s) will be required. If there are load bearing walls either side of the chimney breast, then the Building Control Surveyor may be able to provide you with guidance on the type of beam and bearing which should be provided. In other cases a Structural Engineer should be employed to design a solution.
- Anchor fixings to be used with a minimum 100mm penetration into brickwork.
Please note that in general Gallows Brackets cannot be used if;
- The Wall to which they are to be fixed is less than 225mm thick, or
- The projection of the breast is more than 340mm (more than 150% of the thickness of the supporting wall), or
- The adjacent neighbours chimney breasts have already been removed or partially removed and gallows brackets installed, or
- The Brickwork or Mortar beds of the supporting walling are in poor condition.
Brand: TECO
Model and Size: CSHBZPM8x40
Delivery Time: In stock, 1-2 days
8mm - 40mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied compl..
£16.26
£19.51 inc VAT
Brand: TECO
Model and Size: PSTCG3
Delivery Time: In stock, 1-2 days
3mm Thin Coat Plaster Stop bead is for use on traditional wet 2 or 3 coat plaster application, it provides a precise, clean edge to render where it butts up to other materials such as a door or window frame, reinforcing the edges of the plaster. In external applications and where there is regul..
£3.84
£4.61 inc VAT
Brand: TECO
Model and Size: TBFlange6x75
Delivery Time: In stock, 1-2 days
6x75 Flange Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (F..
£37.90
£45.48 inc VAT
Brand: TECO
Model and Size: PB13/19
Delivery Time: In stock, 1-2 days
Plaster depth 13-19mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impac..
£4.18
£5.02 inc VAT
Brand: TECO
Model and Size: HHR
Delivery Time: In stock, 1-2 days
Stainless Steel Hand Rail Bracket KitKit Contains;4no. 50 x 50 x 30 wide 2.5mm Brackets, 8 no. 4 x 40 Pozi Head Wood Screws, 8no. 4 x 20 Pozi Head Wood ScrewsSpecificationAll A2 Stainless Steel. The A2 stainless steel grade bolt has a decent corrosion resistance under normal conditions such as wet s..
£8.66
£10.39 inc VAT
Brand: TECO
Model and Size: SST180
Delivery Time: In stock, 1-2 days
180mm Starter Ties are used where new walls are being built directly from existing brickwork. There is a drip feature for use where there is a cavity and a new wall needs to be built. Grade 1.4301 austenitic stainless steel to EN 10088-2. Features Stainless steel, Diameter 4mm,Su..
£19.00
£22.80 inc VAT