44x150mm Heavy Duty Face Fix Joist Hanger
44x150mm Heavy Duty Face Fix Joist Hanger
Price: £4.53 (£5.44 inc VAT)
- Product Code: A1-5829
- Delivery Time: 2 - 3 Days
- Brand: TECO
- Model: HWTNT44
- Weight: 753.00g
44x150mm Heavy Duty Face Fix Joist Hanger
Width: 44mm
Height: 150mm
Weight: 753g
44mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275.
SPECIFICATION
- All hangers come up to 150mm deep
- M10 & M12 bolt holes for added versatility
- 95mm bearing
- Nominal depth 150mm
- Available in standard or with concealed flanges
- Available also in stainless steel.
FIXING INSTRUCTIONS for 44x150mm Heavy Duty Face Fix Joist Hanger
- In order of avoiding rotation, the hanger should exceed the half of the supported member depth.
- Can be fully nailed, coach screwed and bolted.
- 3no. M10 x 75mm Coach Screws on either side and the supported joist bolted through the hanger using an M12 Bolt
- The safe working load also depends on the block strength and used fixings.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: TFT100
Delivery Time: In stock, 1-2 days
100mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South ..
£0.43
£0.52 inc VAT
Brand: TECO
Model: PB
Delivery Time: In stock, 1-2 days
7mm Anker-it Yellow Plug is a standard red coloured plastic plug for 7mm hole diameter and 37mm in length. FeaturesAnchor hole size - 7mmPlug length - 37mmMin. anchor hole length - 45mmWood screw size - 5mm to 6mm ..
£1.38
£1.66 inc VAT
Brand: TECO
Model: WR63X225R100
Delivery Time: 2 - 4 days
63mm x 225mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£5.50
£6.60 inc VAT
Brand: TECO
Model: HM900
Delivery Time: In stock, 1-2 days
Galvanised Hex mesh Netting is used for floor screed reinforcement, wall plaster reinforcement and roof insulation. Also can be used for fencing. Made from hot dipped galvanised steel prior to weaving. Gloves should be worn as edges will be sharp.Hex mesh is formed by twisting two adjacent wires at ..
£52.73
£63.28 inc VAT
Brand: TECO
Model: HD1200T150
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1200mm Twisted 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres h..
£3.58
£4.30 inc VAT
Brand: TECO
Model: MMINI - 38x72
Delivery Time: In stock, 1-2 days
38x72mm Mini Mini Joist Hanger is a timber to timber joist hanger suitable for light duty applications such as trimmers, ceiling joists and decking. The hanger is produced from 1mm thick pre-galvanised mild steel. The tag on the base of the hanger helps avoid rotation and aids fast, accurate lo..
£0.53
£0.64 inc VAT