50x210mm Woody Short Leg Joist Hanger
50x210mm Woody Short Leg Joist Hanger
Price: £0.78 (£0.94 inc VAT)
- Product Code: A1-5030
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: SHORTLEG - 50x210
- Weight: 154.00g
50x210mm Woody Short Leg Joist Hanger
Width: 50mm
Height: 210mm
Thickness: 0.8mm
Weight: 154g
50mm x 210mm Woody Short Leg Joist Hanger is produced from 1mm thick pre-galvanised mild steel produced in accordance to EN BS 10327:2004 DX51D+Z275. It has a shortened leg, and with a 50mm joist bearing. The hanger includes a base tag which can significantly contribute to faster and more accurate installation. The base tag would avoid unnecessary rotation. Long term safe working load = 3.96 kN.
FIXING INSTRUCTIONS for 50x210mm Woody Short Leg Joist Hanger
- All holes should be nailed using 30 x 3.75 square twist nails or equivalent, for stainless steel products use 30 x 3.75 stainless steel annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Tag on the base of the hanger to help avoid rotation and aid fast, accurate location. The tag can be bent if not required.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Timber-to-Timber-Joist-Hangers.pdf
Brand: TECO
Model: HI240/3
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes. InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tile..
£1.79
£2.15 inc VAT
Brand: TECO
Model: NUTFBZPM6
Delivery Time: In stock, 1-2 days
M6 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£3.25
£3.90 inc VAT
Brand: TECO
Model: LD900T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 900mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm..
£1.56
£1.87 inc VAT
Brand: TECO
Model: WB30x2.5
Delivery Time: In stock, 1-2 days
30x2.5 galvanised steel water bar for fitting into door sills for weather protection. Galvanised steel EN 10346 DX51D Z275. Traditionally used with wooden doors, the water bar is fitted into the threshold so that the front door closes against it, sealing any gaps and preventing wind and rain from en..
£3.25
£3.90 inc VAT
Brand: TECO
Model: STD - 44x282
Delivery Time: In stock, 1-2 days
44x282mm Woody Standard Joist Hanger is a timber to timber joist hanger produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is also available in stainless steel. The hanger includes a base tag, which can significant..
£0.95
£1.14 inc VAT
Brand: TECO
Model: LL - 63x600
Delivery Time: In stock, 1-2 days
63mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produc..
£4.69
£5.63 inc VAT