Wall Starter Kit WST - 1200mm length pack of 2
Wall Starter Kit WST - 1200mm length pack of 2
Price: £5.50 (£6.60 inc VAT)
- Product Code: A1-5218
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: WST
- Weight: 1,100.00g
Wall Starter Kit WST - 1200mm length pack of 2
Weight: 1100g
Stainless Steel Wall Starter systems WST join new walls to existing masonry, suitable for both internal and external brick or block walls. The connectors can be slotted together up to a maximum of 8 metres or 3 storeys high, from 60 to 250mm thick. Type WST is made from Austenitic Stainless Steel (Grade 304). One kit has two 1200mm lengths.
The kits comprises of:
- 2 profiles, 1.2 m each for 2.3 m total height stainless steel,
- 10 nos stainless steel 6x50 mm coach screws,
- 10 nos stainless steel M6 washers,
- 10 nos plastic plugs,
- 10 nos stainless steel clips.
Features
- Available in two grades of stainless steel.
- Each pack contains the fixings necessary for a single leaf wall up to 2.4m/8 high.
- Full fixing instructions are provided in each pack.
- Engineered for outstanding strength and performance.
- Grade 1.4301 austenitic stainless steel to EN 10088-2.
- Tested by CERAM Research Ltd.
INSTALLATION
Internal Walls
- Plumb the lower connector against the existing wall so that it will be central to the new wall.
- Mark the position of the fixing holes. Each connector should be fixed at three points, the first and last slot and in the centre. Ensuring that one fixing is at the point where the two connectors slot together and overlap. Fixings should be into brickwork and not mortar joints.
- Drill and plug using an 8mm masonry drill bit and the plugs provided.
- Fix the bottom two holes lightly using the stainless steel coach screws and washers.
- Slot the upper connector into the lower one and repeat the above stages. The upper connector can be cut to length if required.
- Tighten all fixings using a 10mm socket or box spanner.
- Build wall in the conventional way with a full mortar joint between the existing and the new wall. Ties should be inserted at a maximum of 300 centres, every third brick course or each block course. Ensure that the ties and connectors are completely embedded with mortar.
Cavity Walls
Each leaf requires a separate starter system.
External Walls
- Ensure that the bottom edge of the connector is above the damp-proof course.
- A weather seal of approximately 10mm should be created between the connector and the existing wall using a flexible mastic sealant or a compressible sealing strip.
- Consult your Local Authority, as additional weather proofing may be required in accordance with local building regulations.
Brand: TECO
Model and Size: DS8x2
Delivery Time: In stock, 1-2 days
Exterior Wood Screw with a green organic coating for a longer life. Ideal for decking and all outdoor applications. FeaturesDiameter - 4mmHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber using a small pilot h..
£8.96
£10.75 inc VAT
Brand: TECO
Model and Size: TFT100
Delivery Time: In stock, 1-2 days
100mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South ..
£0.43
£0.52 inc VAT
Brand: TECO
Model and Size: WM50x150
Delivery Time: 2 - 4 days
50mm x 150mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£2.05
£2.46 inc VAT
Brand: TECO
Model and Size: MFT63/346BA - 63x142
Delivery Time: In stock, 1-2 days
63mm x 142mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base l..
£2.25
£2.70 inc VAT
Brand: TECO
Model and Size: ABG3
Delivery Time: In stock, 1-2 days
Angle Bead is used to provide a true, straight corner which protects and reinforces a 2 or 3 coat plaster or render application in its most vulnerable area. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that drying out t..
£1.59
£1.91 inc VAT
Brand: TECO
Model and Size: WM100x150
Delivery Time: 2 - 4 days
100mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£4.45
£5.34 inc VAT