100x100mm Welded Masonry Joist Hanger
100x100mm Welded Masonry Joist Hanger
Price: £4.33 (£5.20 inc VAT)
- Product Code: A1-5059
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model: WM100x100
- Weight: 700.00g
100x100mm Welded Masonry Joist Hanger
Width: 100mm
Height: 100mm
Weight: 700g
100mm x100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or to steel beams using appropriate fixings. Long term safe working load = 3.5 kN.
Installation of 100x100mm Welded Masonry Joist Hanger
- The back plate of the hanger should lie flat against the vertical masonry support,
- The masonry flange should never be placed in dry slots,
- Masonry flange should have a minimum of 3 courses (675mm masonry) above,
- Use correct strength mortar as per British Standard,
- Both supporting and above masonry should be allowed to mature before any load is applied,
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm,
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent,
- To provide lateral restraint HD Straps should be used,
- Use appropriate corrosion resistant fixings. Do not use galvanised fixings with stainless steel products or vice versa.
Specification
- Pre Galvanised Steel S280GD+Z275
- Also available in Stainless Steel
Certification
- Manufactured to EN 845 - 1:2013.
- Galvanised steel to EN10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088 - 2.
- Tested by CERAM Research Ltd Notification Body No.1289.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model: FHMR47X175R115
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.80
£4.56 inc VAT
Brand: TECO
Model: CSHBZPM12x110
Delivery Time: In stock, 1-2 days
12mm - 110mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£17.86
£21.43 inc VAT
Brand: TECO
Model: SST275
Delivery Time: In stock, 1-2 days
275mm Starter Ties are used where new walls are being built directly from existing brickwork. There is a drip feature for use where there is a cavity and a new wall needs to be built. Grade 1.4301 austenitic stainless steel to EN 10088-2. Features Stainless steel, Diameter 4mm,Su..
£23.25
£27.90 inc VAT
Brand: TECO
Model: HD900B150
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 900mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APP..
£2.55
£3.06 inc VAT
Brand: TECO
Model: LL - 132x450
Delivery Time: In stock, 1-2 days
132mm x 450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the supp..
£6.36
£7.63 inc VAT
Brand: TECO
Model: LD1000B100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1000mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres h..
£1.81
£2.17 inc VAT