132x450mm Woody Long Leg Joist Hanger
132x450mm Woody Long Leg Joist Hanger
Price: £6.45 (£7.74 inc VAT)
- Product Code: A1-5750
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: LL - 132x450
- Weight: 389.00g
132x450mm Timber to Timber Woody Long Leg Joist Hanger
Width: 132mm
Height: 450mm
Weight: 389g
132mm x 450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. This joist hanger ls also available in Grade 1.4301 austenitic stainless steel to EN 10088-2.
Long term safe working load = 11.68 kN. The hangers have been accordingly tested by Ceram Research. Test results are available upon request.
FIXING INSTRUCTIONS for 132x450mm Woody Long Leg Joist Hanger
- All available holes should be nailed using 30 x 3.75 square twist galvanised nails or equivalent, for stainless steel use 30 x 3.75 annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Long-Leg-Hangers_data_sheet.pdf
Brand: TECO
Model: TDS100/25
Delivery Time: In stock, 1-2 days
100mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£10.48
£12.58 inc VAT
Brand: TECO
Model: TCW47
Delivery Time: In stock, 1-2 days
47mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
£0.33
£0.40 inc VAT
Brand: TECO
Model: PBPS20/122
Delivery Time: In stock, 1-2 days
Plaster depth 20-22mm uPVC Plaster Stop Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£4.09
£4.91 inc VAT
Brand: TECO
Model: FHM47/200
Delivery Time: In stock, 1-2 days
47mm x 200mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.55
£3.06 inc VAT
Brand: TECO
Model: WM125x100
Delivery Time: 2 - 4 days
125mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the tim..
£4.70
£5.64 inc VAT
Brand: TECO
Model: EMLS225
Delivery Time: In stock, 1-2 days
225mm Stainless Steel Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together.G..
£68.77
£82.52 inc VAT