75x125mm Welded Masonry Joist Hanger
75x125mm Welded Masonry Joist Hanger
Price: £4.21 (£5.05 inc VAT)
- Product Code: A1-5113
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model: WM75x125
- Weight: 598.00g
75x125mm Welded Masonry Joist Hanger
Width: 75mm
Height: 125mm
Weight: 598g
75mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or to steel beams using appropriate fixings. Long term safe working load = 3.5 kN.
Installation of 75x125mm Welded Masonry Joist Hanger
- The back plate of the hanger should lie flat against the vertical masonry support,
- The masonry flange should never be placed in dry slots,
- Masonry flange should have a minimum of 3 courses (675mm masonry) above,
- Use correct strength mortar as per British Standard,
- Both supporting and above masonry should be allowed to mature before any load is applied,
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm,
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent,
- To provide lateral restraint HD Straps should be used,
- Use appropriate corrosion resistant fixings. Do not use galvanised fixings with stainless steel products or vice versa.
Specification
- Pre Galvanised Steel S280GD+Z275
- Also available in Stainless Steel
Certification
- Manufactured to EN 845 - 1:2013.
- Galvanised steel to EN10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088 - 2.
- Tested by CERAM Research Ltd Notification Body No.1289.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model: WM50x300
Delivery Time: 2 - 4 days
50mm x 300mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£5.16
£6.19 inc VAT
Brand: TECO
Model: TCSS 63mm M12 SS
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mmSingle Sided Stainless Steel Tooth Plate Timber Connector 63mm M12 is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity...
£3.39
£4.07 inc VAT
Brand: TECO
Model: PSTCG3
Delivery Time: In stock, 1-2 days
3mm Thin Coat Plaster Stop bead is for use on traditional wet 2 or 3 coat plaster application, it provides a precise, clean edge to render where it butts up to other materials such as a door or window frame, reinforcing the edges of the plaster. In external applications and where there is regul..
£4.24
£5.09 inc VAT
Brand: TECO
Model: EMLS63
Delivery Time: In stock, 1-2 days
63mm Stainless Steel Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together.Gl..
£20.42
£24.50 inc VAT
Brand: TECO
Model: LD3000F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 3m Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes...
£5.50
£6.60 inc VAT
Brand: TECO
Model: TIJ-TI - 50x240mm
Delivery Time: In stock, 1-2 days
50x240mm Top Fix I-Joist Hanger is an innovative new backer free Joist Hanger to suit solid engineered wood products as well as I-Joists. It is engineered to combine maximum load carrying capacity with easy hands-free site installation, at minimum cost. Long term safe working load = ..
£1.71
£2.05 inc VAT