75x300mm Welded Masonry Joist Hanger
75x300mm Welded Masonry Joist Hanger
Price: £7.19 (£8.63 inc VAT)
- Product Code: A1-5120
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model: WM75x300
- Weight: 817.00g
75x300mm Welded Masonry Joist Hanger
Width: 75mm
Height: 300mm
Weight: 817g
75mm x 300mm Welded Masonry Joist Hanger is designed to support 300mm high timber joist. The joist hanger's actual height is 290mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber and timber to steel applications, where masonry flange should be securely fixed to the timber or to steel beams using appropriate fixings.
Installation of 75x300mm Welded Masonry Joist Hanger
- The back plate of the hanger should lie flat against the vertical masonry support,
- The masonry flange should never be placed in dry slots,
- Masonry flange should have a minimum of 3 courses (675mm masonry) above,
- Use correct strength mortar as per British Standard,
- Both supporting and above masonry should be allowed to mature before any load is applied,
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm,
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent,
- To provide lateral restraint HD Straps should be used,
- Use appropriate corrosion resistant fixings. Do not use galvanised fixings with stainless steel products or vice versa.
Specification
- Pre Galvanised Steel S280GD+Z275
- Also available in Stainless Steel
Certification
- Manufactured to EN 845 - 1:2013.
- Galvanised steel to EN10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088 - 2.
- Tested by CERAM Research Ltd Notification Body No.1289.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model: WTGP-200/50
Delivery Time: In stock, 1-2 days
200mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirem..
£13.31
£15.97 inc VAT
Brand: TECO
Model: TCSS 50mm M12
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm50mm M12 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-gal..
£0.30
£0.36 inc VAT
Brand: TECO
Model: TIJ-TI - 60x240mm
Delivery Time: In stock, 1-2 days
60x240mm Top Fix I-Joist Hanger is an innovative new backer free Joist Hanger to suit solid engineered wood products as well as I-Joists. It is engineered to combine maximum load carrying capacity with easy hands-free site installation, at minimum cost. Long term safe working load = 4.3 kN. Long te..
£1.71
£2.05 inc VAT
Brand: TECO
Model: WM75x100
Delivery Time: 2 - 4 days
75mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or..
£4.20
£5.04 inc VAT
Brand: TECO
Model: FHM50/150
Delivery Time: In stock, 1-2 days
50mm x 150mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using appropr..
£2.20
£2.64 inc VAT
Brand: TECO
Model: LD800T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 800mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.SPECIFIC..
£1.47
£1.76 inc VAT