47x600mm Woody Long Leg Joist Hanger
47x600mm Woody Long Leg Joist Hanger
Price: £4.08 (£4.90 inc VAT)
- Product Code: A1-5240
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: LL - 47x600
- Weight: 662.00g
47x600mm Woody Long Leg Joist Hanger
Width: 47mm
Height: 600mm
Thickness: 1.4mm
Weight: 662g
47mm x600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The product also offers substantial safe working load of 7,11kN at 1.5mm deflection, meaning there is no fear of the hanger breaking off, if the given load of 28,04kN are respected. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request.
.png)
FIXING INSTRUCTIONS for 47x600mm Woody Long Leg Joist Hanger
It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Long-Leg-Hangers_data_sheet.pdf
Brand: TECO
Model: TRS1200B100
Delivery Time: In stock, 1-2 days
1200mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to Th..
£2.30
£2.76 inc VAT
Brand: TECO
Model: LD600F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 600mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centre..
£1.10
£1.32 inc VAT
Brand: TECO
Model: WM44x175
Delivery Time: 2 - 4 days
44mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£2.20
£2.64 inc VAT
Brand: TECO
Model: WTGP-200/250
Delivery Time: In stock, 1-2 days
200mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£66.00
£79.20 inc VAT
Brand: TECO
Model: LL - 44x600
Delivery Time: In stock, 1-2 days
44mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produc..
£4.08
£4.90 inc VAT
Brand: TECO
Model: LD1000B100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1000mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres h..
£1.83
£2.20 inc VAT