38x285mm Woody Standard Joist Hanger
38x285mm Woody Standard Joist Hanger
Price: £0.95 (£1.14 inc VAT)
- Product Code: A1-5005
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: STD - 38x285
- Weight: 230.00g
38x285mm Woody Standard Joist Hanger
Width: 38mm
Height: 285mm
Thickness: 0.8mm
Weight: 230g
38x285mm Woody Standard Joist Hanger is a timber to timber joist hanger produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is also available in stainless steel. The hanger includes a base tag, which can significantly contribute to faster and more accurate installation and to avoid unnecessary rotation. This tag can easily be bent if it is not necessary.
Long term safe working load = 6.43 kN. The hangers have been accordingly tested by Ceram Research. The test results are available upon request.
.png)
FIXING INSTRUCTIONS for 38x285mm Woody Standard Joist Hanger
- 30mm x 3.75mm Square Twisted nails should be used for nailing the holes during installation.
- For stainless steel products use 30mm x 3.75mm stainless steel annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- The tag can be bent if not required.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Timber-to-Timber-Joist-Hangers_data_sheet.pdf
Brand: TECO
Model: LL - 47x450
Delivery Time: In stock, 1-2 days
47x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£3.36
£4.03 inc VAT
Brand: TECO
Model: WTGP-200/250
Delivery Time: In stock, 1-2 days
200mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£67.31
£80.77 inc VAT
Brand: TECO
Model: FFCS200
Delivery Time: In stock, 1-2 days
150mm Stainless Steel Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in G..
£0.98
£1.18 inc VAT
Brand: TECO
Model: MFT47/346BA - 47x150
Delivery Time: In stock, 1-2 days
47mm x 150mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base l..
£2.25
£2.70 inc VAT
Brand: TECO
Model: NP41x152
Delivery Time: In stock, 1-2 days
41x152mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropria..
£27.56
£33.07 inc VAT
Brand: TECO
Model: GBCLIP175/50
Delivery Time: In stock, 1-2 days
175mm Galvanised Gravel Board Clip with lip for concrete for fitting gravel boards securely to concrete fence posts. Width 55mm. Made from Galvanised Steel EN 10346 DX51D Z275. ..
£1.70
£2.04 inc VAT