47x277mm Woody Standard Joist Hanger
47x277mm Woody Standard Joist Hanger
Price: £1.00 (£1.20 inc VAT)
- Product Code: A1-5238
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: STD - 47x277
- Weight: 212.00g
47x277mm Woody Standard Joist Hanger
Width: 47mm
Height: 277mm
Thickness: 0.8mm
Weight: 212g
47x277mm Woody Standard Joist Hanger is a timber to timber joist hanger produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is also available in stainless steel. The hanger includes a base tag, which can significantly contribute to faster and more accurate installation and to avoid unnecessary rotation. This tag can easily be bent if it is not necessary.
Long term safe working load = 6 kN. The hangers have been accordingly tested by Ceram Research. The test results are available upon request.
.png)
FIXING INSTRUCTIONS for 47x277mm Woody Standard Joist Hanger
- 30mm x 3.75mm Square Twisted nails should be used for nailing the holes during installation.
- For stainless steel products use 30mm x 3.75mm stainless steel annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- The tag can be bent if not required.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Timber-to-Timber-Joist-Hangers_data_sheet.pdf
Brand: TECO
Model: WM44x225
Delivery Time: 2 - 4 days
44mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£2.61
£3.13 inc VAT
Brand: TECO
Model: LL - 100x600
Delivery Time: In stock, 1-2 days
100mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The product al..
£5.44
£6.53 inc VAT
Brand: TECO
Model: FFCS200
Delivery Time: In stock, 1-2 days
150mm Stainless Steel Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in G..
£0.98
£1.18 inc VAT
Brand: TECO
Model: FHM47/125
Delivery Time: In stock, 1-2 days
47mm x 125mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.10
£2.52 inc VAT
Brand: TECO
Model: WTDT-250/250
Delivery Time: In stock, 1-2 days
Stainless Steel Double Triangle Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requ..
£108.00
£129.60 inc VAT
Brand: TECO
Model: TCSS 38mm M12
Delivery Time: In stock, 1-2 days
Diameter: 38mmTeeth Size: 0.9mm38mm M 12 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are ..
£0.35
£0.42 inc VAT