47x100mm - R140mm Masonry Return Hanger
47x100mm - R140mm Masonry Return Hanger
Price: £3.98 (£4.78 inc VAT)
- Product Code: A1-5718
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FHMR47X100R140
- Weight: 428.00g
47x100mm - R140mm Masonry Return Hanger
Width: 47mm
Height: 100mm
Weight: 428g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x100mm - R140mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model: EMLS8x2
Delivery Time: In stock, 1-2 days
Gauge: 0.4mmHole length: 20mmHole width: 10mm 8x2 Stainless Steel Expanded Metal Lath Sheet is mainly used for internal and external plaster when applied on suspended ceilings and walls. It is also suitable for encasing steel columns and beams, assisting in the protection from fire. Made of Grade 1...
£30.68
£36.82 inc VAT
Brand: TECO
Model: US4x70
Delivery Time: In stock, 1-2 days
4x70mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£10.26
£12.31 inc VAT
Brand: TECO
Model: DPC100
Delivery Time: In stock, 1-2 days
100mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications. Specification500mu. Produced to BS 6515:84. Suitable for withstanding a compressive load of up..
£3.41
£4.09 inc VAT
Brand: TECO
Model: FB50
Delivery Time: In stock, 1-2 days
50x50mm Galvanised steel, powder coated Bolt Down Shoe. A fence post supports in both standard and heavy duty. Hole size M10. Installation To bolt down onto existing concrete. Suggested fixing 10 x 80mm sleeve anchor...
£10.59
£12.71 inc VAT
Brand: TECO
Model: WSTDGM16
Delivery Time: In stock, 1-2 days
Diameter: 30mm M16 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use gal..
£3.00
£3.60 inc VAT
Brand: TECO
Model: WM50x275
Delivery Time: 2 - 4 days
50mm x 275mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or..
£4.74
£5.69 inc VAT