100mm Damp Proof Course - DPC
100mm Damp Proof Course - DPC
Price: £3.39 (£4.07 inc VAT)
- Product Code: A1-5636
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: DPC100
- Weight: 1,060.00g
100mm Damp Proof Course - DPC
Length: 30000mm
Width: 100mm
Weight: 1060g
100mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications.
Specification
- 500mu.
- Produced to BS 6515:84.
- Suitable for withstanding a compressive load of up to 2.5 N/mm2 as long as no lateral load is applied.
Installation
- Installation should be according to the code of practice CP102:1973 and normal DPC good practice procedures set in BS 5628 should be followed.
- For internal walls, DPC should be installed at the base of load bearing walls and linked with any adjoining DPM.
- The DPC should be at least the width the partition it is applied to and lapped by at least 100mm when two DPCs are joined and linked with any adjoining DPM.
Brand: TECO
Model: WM90x200
Delivery Time: 2 - 4 days
90mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£5.03
£6.04 inc VAT
Brand: TECO
Model: NUTFBZPM10
Delivery Time: In stock, 1-2 days
M10 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£14.85
£17.82 inc VAT
Brand: TECO
Model: ERSG3
Delivery Time: In stock, 1-2 days
Galvanised External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used ..
£2.53
£3.04 inc VAT
Brand: TECO
Model: TCDS 76mm M12
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mm76mm M12 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£1.00
£1.20 inc VAT
Brand: TECO
Model: GTS - 76x300
Delivery Time: In stock, 1-2 days
76mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significan..
£3.33
£4.00 inc VAT
Brand: TECO
Model: TFT75
Delivery Time: In stock, 1-2 days
75mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South E..
£0.33
£0.40 inc VAT