47x100mm - R150mm Masonry Return Hanger
47x100mm - R150mm Masonry Return Hanger
Price: £3.98 (£4.78 inc VAT)
- Product Code: A1-5719
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FHMR47X100R150
- Weight: 433.00g
47x100mm - R150mm Masonry Return Hanger
Width: 47mm
Height: 100mm
Weight: 433g
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many specials and variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre glavanised 2.4mm
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Where appropriate tested by CERAM Research Ltd Notification Body No.1289.
Installation of 47x100mm - R150mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model: DS10x3
Delivery Time: In stock, 1-2 days
Exterior Wood Screw with a green organic coating for a longer life. Ideal for decking and all outdoor applications. FeaturesDiameter - 5mmHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber using a small pi..
£16.85
£20.22 inc VAT
Brand: TECO
Model: TCDS 76mm M12
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mm76mm M12 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£1.06
£1.27 inc VAT
Brand: TECO
Model: LL - 125x600
Delivery Time: In stock, 1-2 days
125mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produ..
£5.81
£6.97 inc VAT
Brand: TECO
Model: DPC100
Delivery Time: In stock, 1-2 days
100mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications. Specification500mu. Produced to BS 6515:84. Suitable for withstanding a compressive load ..
£3.41
£4.09 inc VAT
Brand: TECO
Model: WM63x275
Delivery Time: 2 - 4 days
63mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£6.52
£7.82 inc VAT
Brand: TECO
Model: HD1800F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1800mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£5.37
£6.44 inc VAT