225mm Stainless Steel Housing Tie - pack of 50

225mm Stainless Steel Housing Tie - pack of 50
Price: £9.69 (£11.63 inc VAT)
- Product Code: A1-5490
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: WT-225/50
- Weight: 600.00g
225mm Stainless Steel Housing Tie - pack of 50
Length: 225mm
Weight: 600g
225mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.

Specification
- Fully tested to BS EN846-5:2000
- Meets the requirements of BS EN 845-1:2003.
- Housing Ties meet the requirements of Part E of the Building Regulations for Type A in party walls of any height, which states that a masonry cavity wall tie can only be used if the measured dynamic stiffness is less than 4.8MN/m.
Features
- Tangle free - saves time and money. Supplied in bundles - practical benefits for the bricklayer.
- Safety on site.
- Better storage particularly during inclement weather.
- Unique crossed and closed end prevents entanglement.


Brand: TECO
Model and Size: WM44x300
Delivery Time: 2 - 4 days
44mm x 300mm Welded Masonry Joist Hanger is designed to support 300mm high timber joist. The joist hanger's actual height is 290mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.89
£5.87 inc VAT
Brand: TECO
Model and Size: FHMR47X100R150
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£3.56
£4.27 inc VAT
Brand: TECO
Model and Size: WNT - 47x306
Delivery Time: In stock, 1-2 days
Woody No Tag Joist Hanger 47 x 306mm is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request. Also available in Stain..
£0.60
£0.72 inc VAT
Brand: TECO
Model and Size: PY
Delivery Time: In stock, 1-2 days
5mm Anker-it Yellow Plug is a standard 5mm yellow coloured plastic plug for 5mm hole diameter and 22mm in length. FeaturesAnchor hole size - 5mmPlug length - 22mmMin. anchor hole length - 30mmWood screw size = 2.5mm to 5mm ..
£0.98
£1.18 inc VAT
Brand: TECO
Model and Size: STUDBZPM10
Delivery Time: In stock, 1-2 days
M10 Bright Zinc Plated Studding ( threaded bar), suitable for many applications. Supplied as standard in mild steel, high tensile available to order. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with sta..
£1.99
£2.39 inc VAT
Brand: TECO
Model and Size: GB375
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast is l..
£36.94
£44.33 inc VAT