47x125mm - R140mm Masonry Return Hanger
47x125mm - R140mm Masonry Return Hanger
Price: £4.21 (£5.05 inc VAT)
- Product Code: A1-5723
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FHMR47X125R140
- Weight: 478.00g
47x125mm - R140mm Masonry Return Hanger
Width: 47mm
Height: 125mm
Weight: 478g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x125mm - R140mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model: HFR195
Delivery Time: In stock, 1-2 days
195mm Helical Flat Roof Fixing is a hammer driven fixing for securing composite panels to wooden battens. Bright zinc plated. For 126-150mm thick panels. Features8mm diameter. Large 20mm head.Quick installation - no drilling, no need for screws. Unique one piece to prevent bending during installati..
£0.66
£0.79 inc VAT
Brand: TECO
Model: TBCSK6x100
Delivery Time: In stock, 1-2 days
6x100 Countersunk Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 75mm Drill Dia: 6mm Hole Depth Embedment: 10mmMax Fixture Thickness: 45mm Clearance Hol..
£49.46
£59.35 inc VAT
Brand: TECO
Model: WM75x100
Delivery Time: 2 - 4 days
75mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or..
£4.20
£5.04 inc VAT
Brand: TECO
Model: WS63x200S100
Delivery Time: 2 - 4 days
Straddle: 100mm63mm x 200mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned dire..
£11.93
£14.32 inc VAT
Brand: TECO
Model: LL - 125x600
Delivery Time: In stock, 1-2 days
125mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The product also of..
£5.81
£6.97 inc VAT
Brand: TECO
Model: LD900T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 900mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.SPECIFIC..
£1.65
£1.98 inc VAT