Light Duty Restraint Strap 300mm Flat

Light Duty Restraint Strap 300mm Flat
Rate this product
Light Duty Restraint Strap 300mm Flat
Price: £0.55 (£0.66 inc VAT)
  • Product Code: A1-5372
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: LD300F
  • Weight: 152.00g
Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Add another bend/twist
Quantity
Add next custom strap

Galvanised Light Duty Restraint Strap 300mm Flat

Length: 300mm
Width: 28mm
Thickness: 2.4mm
Weight: 152g

Galvanised Light Duty Restraint Strap 300mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Please note: 1-3 metre lengths come from a coil rather than a solid rigid bar. The physical characteristics of the metal mean that after a certain length they can bend rather than being flat rigid. It is not a question of any fault but rather the ‘nature of the beast’. The phrase: “straps are flat” is not misleading! It means they are not bent or twisted; at no point is there any claim that they are straight and true. Strap material is edge-coat galvanised which is required by the standard. This process, and the fact that the material is a coil does cause deflection, and the longer the length the more it is apparent.

50mm M16mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Brand: TECO Model: TCSS 50mm M16
Delivery Time: In stock, 1-2 days
50mm M16mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Diameter: 50mmTeeth Size: 0.9mm50mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-gal..
£0.50
£0.60 inc VAT
125x150mm Heavy Duty Face Fix Joist Hanger
Brand: TECO Model: HWTNT125
Delivery Time: 2 - 3 Days
125x150mm Heavy Duty Face Fix Joist Hanger
125mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings.  The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONAll hangers come..
£5.14
£6.17 inc VAT
175mm Galvanised Gravel Board Clip with lip for concrete - 50mm width
Brand: TECO Model: GBCLIP175/50
Delivery Time: In stock, 1-2 days
175mm Galvanised Gravel Board Clip with lip for concrete - 50mm width
175mm Galvanised Gravel Board Clip with lip for concrete for fitting gravel boards securely to  concrete fence posts. Width 55mm. Made from Galvanised Steel EN 10346 DX51D Z275.  ..
£1.70
£2.04 inc VAT
10x150 Zinc Plated Coach Bolt - Box of 25
Brand: TECO Model: CSHBZPM10x150
Delivery Time: In stock, 1-2 days
10x150 Zinc Plated Coach Bolt - Box of 25
10mm - 150mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£13.94
£16.73 inc VAT
250mm Stainless Steel Housing Tie - pack of 250
Brand: TECO Model: WT-250/250
Delivery Time: In stock, 1-2 days
250mm Stainless Steel Housing Tie - pack of 250
250mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirements of BS EN..
£48.00
£57.60 inc VAT
M20 Zinc Plated Hex Full Nuts - box of 50
Brand: TECO Model: NUTFBZPM20
Delivery Time: In stock, 1-2 days
M20 Zinc Plated Hex Full Nuts - box of 50
M20 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£19.31
£23.17 inc VAT