47x200mm - R140mm Masonry Return Hanger
47x200mm - R140mm Masonry Return Hanger
Price: £4.69 (£5.63 inc VAT)
- Product Code: A1-5739
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FHMR47X200R140
- Weight: 613.00g
47x200mm - R140mm Masonry Return Hanger
Width: 47mm
Height: 200mm
Weight: 613g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x200mm - R140mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model: SVM
Delivery Time: In stock, 1-2 days
75mm Stainless Steel Soffit Vent Mesh is for use in new build properties. It is used over vents in soffits to allow air flow to prevent condensation but prevents access to birds and insects. Made from Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gloves should be worn as edges may be sharp...
£78.51
£94.21 inc VAT
Brand: TECO
Model: SFT130
Delivery Time: In stock, 1-2 days
Stainless Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Grade 1.4301 austenitic stainless steel to EN 10088-2. Threaded one end. Screw directly into timber using a small pilot hole if required. - 3mm..
£108.58
£130.30 inc VAT
Brand: TECO
Model: TCSS 50mm M10
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm50mm M10 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.50
£0.60 inc VAT
Brand: TECO
Model: HWTNT225
Delivery Time: 2 - 3 Days
225mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONA..
£12.73
£15.28 inc VAT
Brand: TECO
Model: CSHBZPM12x280
Delivery Time: In stock, 1-2 days
12mm - 280mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£38.44
£46.13 inc VAT
Brand: TECO
Model: PB
Delivery Time: In stock, 1-2 days
7mm Anker-it Yellow Plug is a standard red coloured plastic plug for 7mm hole diameter and 37mm in length. FeaturesAnchor hole size - 7mmPlug length - 37mmMin. anchor hole length - 45mmWood screw size - 5mm to 6mm ..
£1.38
£1.66 inc VAT