112mm Damp Proof Course - DPC
112mm Damp Proof Course - DPC
Price: £3.39 (£4.07 inc VAT)
- Product Code: A1-5637
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: DPC112
- Weight: 1,190.00g
112mm Damp Proof Course - DPC
Length: 30000mm
Width: 112mm
Weight: 1190g
112mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications.
Specification
- 500mu.
- Produced to BS 6515:84.
- Suitable for withstanding a compressive load of up to 2.5 N/mm2 as long as no lateral load is applied.
Installation
- Installation should be according to the code of practice CP102:1973 and normal DPC good practice procedures set in BS 5628 should be followed.
- For internal walls, DPC should be installed at the base of load bearing walls and linked with any adjoining DPM.
- The DPC should be at least the width the partition it is applied to and lapped by at least 100mm when two DPCs are joined and linked with any adjoining DPM.
Brand: TECO
Model: DS10x3
Delivery Time: In stock, 1-2 days
Exterior Wood Screw with a green organic coating for a longer life. Ideal for decking and all outdoor applications. FeaturesDiameter - 5mmHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber using a small pi..
£16.85
£20.22 inc VAT
Brand: TECO
Model: WM90x100
Delivery Time: 2 - 4 days
90mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.33
£5.20 inc VAT
Brand: TECO
Model: MFM - 38x101
Delivery Time: In stock, 1-2 days
38mm x 101mm Multifunctional Mini Joist Hanger is a Face Fix Joist Hanger, produced from 1.2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19..
£1.73
£2.08 inc VAT
Brand: TECO
Model: GTS - 76x300
Delivery Time: In stock, 1-2 days
76mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significan..
£3.33
£4.00 inc VAT
Brand: TECO
Model: ERSG2.4
Delivery Time: In stock, 1-2 days
Galvanised External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used in sh..
£2.08
£2.50 inc VAT
Brand: TECO
Model: TCSS 63mm M10
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mm63mm M10 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.73
£0.88 inc VAT