85x87mm Galvanised Nail Plate - box of 100
85x87mm Galvanised Nail Plate - box of 100
Price: £46.74 (£56.09 inc VAT)
- Product Code: A1-5793
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: NP85x87
- Weight: 3,400.00g
85x87mm Galvanised Nail Plate - box of 100
Length: 87mm
Width: 85mm
Weight: 3400g
85x87mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275.
Installation
- Use appropriate fixings. Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
Brand: TECO
Model and Size: LD1100F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1100mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres ho..
£1.91
£2.29 inc VAT
Brand: TECO
Model and Size: RLG
Delivery Time: In stock, 1-2 days
Galvanised Rib Lath is stiffened by longitudinal ribs, for use on ceilings and partitions. For internal and external plaster key applications and anti-crack control. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that drying o..
£13.98
£16.78 inc VAT
Brand: TECO
Model and Size: WM100x125
Delivery Time: 2 - 4 days
100mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the tim..
£4.38
£5.26 inc VAT
Brand: TECO
Model and Size: TCSS 63mm M16
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mm63mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.73
£0.88 inc VAT
Brand: TECO
Model and Size: TCW47
Delivery Time: In stock, 1-2 days
47mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
£0.31
£0.37 inc VAT
Brand: TECO
Model and Size: LL - 63x450
Delivery Time: In stock, 1-2 days
63x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£4.06
£4.87 inc VAT