63x450mm Woody Long Leg Joist Hanger
63x450mm Woody Long Leg Joist Hanger
Price: £4.12 (£4.94 inc VAT)
- Product Code: A1-5045
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: LL - 63x450
- Weight: 481.00g
63x450mm Woody Long Leg Joist Hanger
Width: 63mm
Height: 600mm
Thickness: 1.4mm
Weight: 481g
63x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. This joist hanger ls also available in Grade 1.4301 austenitic stainless steel to EN 10088-2.
Long term safe working load = 11.68 kN. The hangers have been accordingly tested by Ceram Research. Test results are available upon request.
FIXING INSTRUCTIONS for 63x450mm Woody Long Leg Joist Hanger
- All available holes should be nailed using 30 x 3.75 square twist galvanised nails or equivalent, for stainless steel use 30 x 3.75 annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Long-Leg-Hangers_data_sheet.pdf
Brand: TECO
Model: TFT75
Delivery Time: In stock, 1-2 days
75mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South E..
£0.33
£0.40 inc VAT
Brand: TECO
Model: WM75x275
Delivery Time: 2 - 4 days
75mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£6.18
£7.42 inc VAT
Brand: TECO
Model: STUDBZPM16
Delivery Time: In stock, 1-2 days
M16 Bright Zinc Plated Studding ( threaded bar), suitable for many applications. Supplied as standard in mild steel, high tensile available to order. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with sta..
£4.04
£4.85 inc VAT
Brand: TECO
Model: FHMST215
Delivery Time: 2 - 4 days
Single Piece Masonry Hanger Lock Plate is an additional element to use with the FHM Single Piece Joist Hanger and the WM Welded Masonry Joist Hanger. This plate is easily be transformed into a hook over joist hanger. No special tools or rivets are required. Just insert Lock ..
£1.52
£1.82 inc VAT
Brand: TECO
Model: SBG3
Delivery Time: In stock, 1-2 days
Galvanised Skim Angle Bead is for use on plasterboard or aerated blocks. Designed for standard single coat plasterwork for internal thin-coat plaster application, used to reinforce and protect plaster on corners and reveals at its weakest points.Specification Galvanised steel EN 10346 DX51..
£1.80
£2.16 inc VAT
Brand: TECO
Model: LD1000B100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1000mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres h..
£1.83
£2.20 inc VAT