225mm Stainless Steel Housing Tie - pack of 250
225mm Stainless Steel Housing Tie - pack of 250
Price: £36.00 (£43.20 inc VAT)
- Product Code: A1-5491
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: WT-225/250
- Weight: 3,000.00g
225mm Stainless Steel Housing Tie - pack of 250
Length: 225mm
Weight: 3000g
225mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.
Specification
- Fully tested to BS EN846-5:2000
- Meets the requirements of BS EN 845-1:2003.
- Housing Ties meet the requirements of Part E of the Building Regulations for Type A in party walls of any height, which states that a masonry cavity wall tie can only be used if the measured dynamic stiffness is less than 4.8MN/m.
Features
- Tangle free - saves time and money. Supplied in bundles - practical benefits for the bricklayer.
- Safety on site.
- Better storage particularly during inclement weather.
- Unique crossed and closed end prevents entanglement.
Brand: TECO
Model: WM90x225
Delivery Time: 2 - 4 days
90mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£5.47
£6.56 inc VAT
Brand: TECO
Model: SRTCSS 102mm
Delivery Time: In stock, 1-2 days
Diameter: 102mm102mm Stainless Steel Split Ring Timber Connector is designed for heavy shear loads in timber to timber connections.The Split Ring with the bevelled inside and outside face makes it easier to insert in the pre-cut grooves and also gives greater load capacity.The Ring is..
£20.73
£24.88 inc VAT
Brand: TECO
Model: WM50x250
Delivery Time: 3 - 5 days
50mm x 250mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.51
£5.41 inc VAT
Brand: TECO
Model: GB375
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast is l..
£36.94
£44.33 inc VAT
Brand: TECO
Model: HI200/3
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes. InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tiles so ..
£1.76
£2.11 inc VAT
Brand: TECO
Model: WM63x275
Delivery Time: 2 - 4 days
63mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£6.52
£7.82 inc VAT