76x82mm Multifunctional Mini Joist Hanger
76x82mm Multifunctional Mini Joist Hanger
Price: £1.73 (£2.08 inc VAT)
- Product Code: A1-5021
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFM - 76x82
- Weight: 226.00g
76x82mm Multifunctional Mini Joist Hanger
Width: 76mm
Height: 82mm
Thickness: 1mm
Weight: 226g
76mm x 82mm Multifunctional Mini Joist Hanger
is a Face Fix Joist Hanger, produced from 1.2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed.
FIXING INSTRUCTIONS for 76x82mm Multifunctional Mini Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: FHMR47X125R215
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.90
£4.68 inc VAT
Brand: TECO
Model: TCSS 76mm M12 SS
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mmSingle Sided Stainless Steel Tooth Plate Timber Connector 76mm M12 is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity...
£3.44
£4.13 inc VAT
Brand: TECO
Model: LL - 50x450
Delivery Time: In stock, 1-2 days
50x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£3.36
£4.03 inc VAT
Brand: TECO
Model: LD3000F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 3m Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes...
£5.20
£6.24 inc VAT
Brand: TECO
Model: FEX100
Delivery Time: In stock, 1-2 days
100x100mm Galvanised powder coated Fence Post Extender. Ideal for joining two fence posts together. Hole size M10. Please note: The design changes from time to time without notice. Sometimes we get the extenders with the holes, sometimes with the slats. At the moment ..
£13.64
£16.37 inc VAT
Brand: TECO
Model: WNT - 47x306
Delivery Time: In stock, 1-2 days
Woody No Tag Joist Hanger 47 x 306mm is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request. Also available in Stain..
£0.60
£0.72 inc VAT