Galvanised Light Duty Restraint Strap 750mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm..

Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..

Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..

Diameter: 50mmTeeth Size: 0.9mm50mm M10 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..

20mm wide versatile multi purpose banding that can be cut, bent and formed for all types of light applications. Galvanised steel EN to 10346 DX51D Z275 0.9mm thick. Holes: 3.75, M10 round, M10 & M8 square. The square holes are suitable for cup square hex (coach bolts)...

63mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significan..